GERMAN WW1 ITEMS
List items according to price | title
|< << 1 2 >> >|

German army WW1 K98 mauser cleaning rod 39cm 15 3/8"

This is a top quality European made reproduction of an early German army Mauser K98 wartime rifle cleaning rod. The Mauser rifles made after 1936 and up to the end of the war was the 39 (15 3/8"). It is $4.00 to ship these items anywhere in the US, Canada, Australia, New Zealand and most of Asia. Postage within Europe is $3.00.

  Our price: 19,00 $
 

Ea.

German army M16 M18 WW1 repro helmet liner pads 3pcs

This is a Czech made reproduction set of German army WW1 M16 M17 M18 helmet liner pads. They are the pads that go into the pocket of the helmet liner to be used as the actual padding. The pads are filled with artificial fibers so smell and moth damage will be no problem.  It is only $3.00 to ship these liner pads anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within the EU is $2.50. Naturally I do offer the possibility of combining postage to save you money. When you buy a chinstrap and/or helmet rivets you only pay postage for the liner.

  Our price: 16,00 $
 

Ea.

German army M16 WW1 repro helmet liner with pads size 62

This is a Czech made reproduction of a German army WW1 M16 helmet liner. The band is made of leather with the cutouts for the inside vent fixing washers. The liner band does not have the rivet holes since not all rivet holes on the helmet were at the exact same location. The seam of the liner goes on the back of the helmet and then you can make the holes for the liner where the holes on your helmet are. The holes for the rivets should be made in the exact center of the band for the best fit. The nice extra I supply with this helmet liner is the helmet pads. On top of that my pads are filled with artificial fibers so smell and moth damage will be no problem. This particular liner is for the size 62 helmet shell that fits both the size 54 and 55 hat sizes. It is only $9.50 to ship this liner anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within the EU is $7.00. Naturally I do offer the possibility of combining postage to save you money. When you buy a chinstrap and/or helmet rivets you only pay postage for the liner.

  Our price: 45,00 $
 

Ea.

German army M16 WW1 repro helmet liner with pads size 64

This is a Czech made reproduction of a German army WW1 M16 helmet liner. The band is made of leather with the cutouts for the inside vent fixing washers. The liner band does not have the rivet holes since not all rivet holes on the helmet were at the exact same location. The seam of the helmet goes on the back of the helmet and then you can make the holes for the liner where the holes on your helmet are. The holes for the rivets should be made in the exact center of the band for the best fit. The nice extra I supply with this helmet liner is the helmet pads. On top of that my pads are filled with artificial fibers so smell and moth damage will be no problem. This particular liner is for the size 64 helmet shell that fits both the size 56 and 57 hat sizes. It is only $9.50 to ship this liner anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within the EU is $7.00. Naturally I do offer the possibility of combining postage to save you money. When you buy a chinstrap and/or helmet rivets you only pay postage for the liner.

  Our price: 45,00 $
 

Ea.

German army M16 WW1 repro helmet liner with pads size 66

This is a Czech made reproduction of a German army WW1 M16 helmet liner. The band is made of leather with the cutouts for the inside vent fixing washers. The liner band does not have the rivet holes since not all rivet holes on the helmet were at the exact same location. The seam of the helmet goes on the back of the helmet and then you can make the holes for the liner where the holes on your helmet are. The holes for the rivets should be made in the exact center of the band for the best fit. The nice extra I supply with this helmet liner is the helmet pads.  On top of that my pads are filled with artificial fibers so smell and moth damage will be no problem. This particular liner is for the size 66 helmet shell that fits both the size 58 and 59 hat sizes. It is only $9.50 to ship this liner anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within the EU is $7.00. Naturally I do offer the possibility of combining postage to save you money. When you buy a chinstrap and/or helmet rivets you only pay postage for the liner.

  Our price: 45,00 $
 

Ea.

German army M16 WW1 repro helmet liner with pads size 68

This is a Czech made reproduction of a German army WW1 M16 helmet liner. The band is made of leather with the cutouts for the inside vent fixing washers. The liner band does not have the rivet holes since not all rivet holes on the helmet were at the exact same location. The seam of the helmet goes on the back of the helmet and then you can make the holes for the liner where the holes on your helmet are. The holes for the rivets should be made in the exact center of the band for the best fit. The nice extra I supply with this helmet liner is the helmet pads. On top of that my pads are filled with artificial fibers so smell and moth damage will be no problem. This particular liner is for the size 68 helmet shell that fits both the size 60 and 61 hat sizes. It is only $9.50 to ship this liner anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within the EU is $7.00. Naturally I do offer the possibility of combining postage to save you money. When you buy a chinstrap and/or helmet rivets you only pay postage for the liner.

  Our price: 45,00 $
 

Ea.

German army WW1 repro steel helmet rivets, set of three.

 This is a set of 3 reproduction German army WW1 steel helmet rivets. These rivets work for the German WW1 steel helmets, M16, M17, M18 and the later model Austrian helmets. The set comes with 2 thin head rivets and one thick head rivets. The thin head rivets go in the front so it does not interfere when the front armor plate is set on the helmet. Do note that the WW1 helmet rivets did not use the washers with the rivets like the WW2 rivets. It is only $2.00 to ship these rivets to anywhere outside Europe and only $1.00 to ship this item within Europe.

  Our price: 12,00 $
 

Ea.

GERMAN ARMY WWI WW1 REPRO STEEL HARDWARE CHINSTRAP

This is a Czech made reproduction German WWI helmet chinstrap with steel hardware.  It is only $3.00 to ship these rivets to anywhere outside Europe and only $2.00 to ship this item within Europe.

  Our price: 29,00 $
 

Ea.

GERMAN ARMY WWI WW1 REPRO BRASS HARDWARE CHINSTRAP

This is a Czech made reproduction German WWI helmet chinstrap with brass hardware. These chinstraps were used on the spike helmets and later used on the M16 and M17 steel helmets. The brass hardware on the chinstraps was soon replaced by steel hardware chinstraps for wide used on the M16 and M17 combat helmets. It is only $3.00 to ship these rivets to anywhere outside Europe and only $2.00 to ship this item within Europe.

  Our price: 29,00 $
 

Ea.

GERMAN ARMY WWI WW1 PRUSSIAN STYLE REPRO STEEL BELT BUCKLE

This is a repro German WW Prussian style belt buckle. The item is faithfully reproduced to look like the original and has even been treated to look a bit aged. For registered airmail it is only $5.50 to ship this buckle to anywhere outside Europe and only $4.50 to ship this item within Europe.

  Our price: 29,00 $
 

Ea.

List items according to price | title
|< << 1 2 >> >|
Search also in item description
Advanced search

Your e-mail address to receive news: